ECO-SOL 50
Above-ground solar light beaconStainless steel solar bezel
ECO-SOL 50 solar bulrushes transform outdoor spaces into lively, colorful light compositions. 100% self-sufficient, they store solar energy during the day and come to life automatically when night falls. Their stainless steel structure guarantees durability and strength, for aesthetic enhancement of parks, gardens and forecourts without the need for grid lighting.
Applications
- Park & Square
Features
- Colors temperature
- Materials
Stainless steel / UV-resistant polycarbonate.
Monocrystalline photovoltaic cells
- Protection ratings (IP)
IP 68
- Impact energy
IK 10 20 J
- Dimensions
Grass heights from 50 cm to 150 cm above ground. 5 or 10 mm anchor bolt diameter.
- Power supply & consumption
Capacitor
- Operating temperatures
-40°C to +70°C
- Customization
Stainless steel, powder-coated (RAL to choice)
- LED
1 central LED
- Characteristics
Light mode: glow / breathable / candle / fixed (to be defined when ordering).
Available colors: warm white, cool white, blue, green, red or amber
Installation
1 – Once you’ve identified the location of the grommets, drill a hole with a maximum diameter of 15-20 mm and a minimum depth of 60 mm.
2 – Thoroughly clean the hole to remove all dust and traces of moisture which could reduce the effectiveness of the glue.
3 – Pour the sealing adhesive into the hole (about 2/3 of the way down).
> We recommend a two-component epoxy adhesive such as Sikadur 30 for installation on asphalt, concrete or stone.
4 – Insert the solar fastener into the epoxy glue.
Remove any glue residue with a sponge and allow to dry for several hours, depending on ambient temperature (refer to glue instructions).
Note: keep the polycarbonate screen protecting the solar panel clean or protected throughout these operations.
Our solar rods are charged by daylight. To ensure that they work properly, we recommend installing them on suitable sites (with few masks on the photovoltaic sensors during the day).
Failure to comply with these instructions may result in suspension of the warranty.
Warranty
Average lifespan 10 years
Warranty 2 years*.
The end-of-life solar stud can be replaced by a new model without having to unseal the anchor bolt.
* The warranty applies in the event of permanent shutdown of the autonomous lighting system under normal use and installation in accordance with our recommendations. It consists of replacing the faulty component with an identical or equivalent item, subject to return to ECO-INNOV for analysis. On-site intervention costs are not included. Mechanical damage is not covered.
We recommend installing our solar equipment on sites with good light exposure for optimum performance.
Recycling
Certifications
