ECO 050 S Reflective Border Stud
(product sheet)
Our border studs ECO50S are used to signal and secure precise roadway points on the heads of road islands, chicanes, pavements, roundabouts.
The main advantages of these models are listed hereafter:
- Fast Assembly at reduced cost.
- For the rubber-based models, installation is possible in rainy weather since the use of adhesive epoxy is not necessary.
- Glass is insensitive to static electricity (no risk of dust accumulation contrary to the reflective plastic studs).
- Glass is cleaned effectively during rainy weather, without man intervention.
- Better durability than aluminum or plastic reflective road studs.
Characteristics: Ø 50 mm. Weight: Approximately 170 gr. Material: Tempered glass. Pressure resistance: > 18 tons. Omnidirectional marking 360° reflecting. Available colour: white.
Download the worksheet ECO50S.pdf
ECO 360 Reflective Stud
(product sheet)
Our road stud ECO360 -made of glass- is used to mark out and signal road islands, lane separators, roundabouts, tunnels. The main advantages of these models are listed hereafter :
- They completely fulfill mechanical resistance requirements.
- Glass is insensitive to static electricity (no risk of dust accumulation, contrary to the reflective plastic studs).
- Glass is cleaned effectively during rainy weather, without man intervention.
Characteristics: Ø 100 mm - Height from 14 to 25 mm. Weight: Approximately 0,5 kg. Material: Tempered glass. Pressure resistance: > 40 tons. Omnidirectional, retro-reflecting marking at 360°. Available colours: blue, white, green, yellow.
Our studs are in conformity with EN-1463-1 and EN-1463-2 standards, for the dome heights of 25 and 19 mm in white. According to these standards, only the white colour is authorised for a permanent use on roadway.
Download the worksheet ECO360.pdf
